It's Free! Sign In and Save! Learn More.

Cart is empty

 
8561 MG10-MT 1/10 4WD RTR
 
 
 
 

8561 MG10-MT 1/10 4WD RTR

Part Number: CEG8561

Brand: Cen Racing/genka Trading Company

Discontinued/Sold Out

  • features
     
  • specs
     
  • Question
     

Features

Cen Racing/genka Trading Company - CEG8561 - 8561 MG10-MT 1/10 4WD RTR

  • Chassis: Composite construction, black in color with reinforcement gussets underneath and composite transmission brace
  • Drive: Four wheel shaft
  • Radio: Cen Skyion DSX AM 27mhz radio system with two standard servos,
  • 10 model memory, sealed receiver and battery box, and charge jack
  • Engine: Cen .15 cu in (2.5cc) with pull starter, slide valve carb, glow plug and foam air filter
  • Exhaust: Composite construction tuned pipe
  • Clutch: Two Teflon shoes with 13 tooth metal clutch bell
  • Transmission: Single speed equipped with ball bearings and slipper clutch, internal hex shaped output shafts directly engage dogbones with no output cups to wear out
  • Ball Bearings: Full set included
  • Dog bone style drive shafts on front and rear
  • Fuel Tank: 2.5oz (75cc)
  • Spur Gear: Composite construction, 55 tooth
  • Gearboxes: Sealed
  • Differentials: Composite cases with three gear planetary design
  • Shocks: Four composite body, oil-filled
  • Brake: Single disc
  • Tires: High rectangle pin tread pattern with foam insterts 2.05" (52
  • 2.05" (52mm) wide and 4" (102mm) outside diameter
  • Wheels: Plastic dish shaped 2.2" (57mm) diameter (12mm hex size)
  • **many aftermarket 1/10 scale tires and wheels will also fit**
  • Bumper: Front, high impact composite construction
  • Suspension: Adjustable
  • Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
  • Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
  • Steering: Bell crank type with servo saver

Specifications

Cen Racing/genka Trading Company - CEG8561 - 8561 MG10-MT 1/10 4WD RTR

  • Vehicle-
  • Length: 11.1" (282mm)
  • Width: 12.68" (322mm)
  • Height: 7.5" (190mm)
  • Weight: Not Listed
  • Wheelbase: 11.1" (282mm)
  • Front Tread: 10.5" (267mm)
  • Rear Tread: 10.5" (267mm)
  • Front Track: 12.5" (317mm)
  • Rear Track: 12.5" (317mm)
  • Ground Clearance: 1.38" (35mm)
  • Gear Ratio: 1:12.410
  • Body-
  • Length: 16.5" (419mm)
  • Width: 7" (178mm)
  • Height: 4.75" (120mm)