Comments

Top Flite - TOPTOPQ0507 - MonoKote Flat Insignia Blue 6

• Paints, Trim Sheets, EconoKote and Different Lots of MonoKote May
• Vary Slightly In Color Between Production Runs of These Products.
• If Using Three or More Rolls of the Same Color, it is Suggested to
• Use a 25' Roll To Ensure the Same Dye Lot for the Entire
• Model Being Covered.
• LustreKote Primer Must Be Used With LustreKote Paint to Bring Out Its
• True Color.
• MonoKote Trim Sheet (Gloss): TOPQ4106
• MonoKote (Gloss): TOPQ0207
• MonoKote is a High Temperature Covering, NOT For Use Directly On Foam
• EconoKote IS For Use Directly On Foam, Use the Following:
• EconoKote Covering: TOPQ2601-TOPQ2612
• (EconoKote may be used on top of, but not under MonoKote.)
• **Temperature Ranges: Flat MonoKote Uses a Higher Temperature to Apply.
• Attaching to Wood: 240 - 275°F (activating the glue)
• Partial Shrinkage: 230 - 270°F
• Maximum Shrinkage: 270 - 350°F
• TECH

Features

Top Flite - TOPTOPQ0507 - MonoKote Flat Insignia Blue 6

• Super Strong with a Tensile Strength of 25,000 psi (pounds/sq in)
• Lightweight at Only 0.2 oz/sq ft
• Dry Adhesive Activates When Heat is Applied
• Shrinks to a Drum-Tight Finish As It Cools
• Fuelproof and Waterproof
• Stronger and Lighter Than Traditional Silk and Dope Coverings
• May be Cleaned with Glass Cleaner, "409" or MonoKote Cleaner/Polish

Requires

Top Flite - TOPTOPQ0507 - MonoKote Flat Insignia Blue 6

• Sealing Iron (TOPR2100), Heat Gun (TOPR2000), Iron Sock (TOPR2175)

Includes

Top Flite - TOPTOPQ0507 - MonoKote Flat Insignia Blue 6

• One 6' x 26" Roll of Flat Insignia Blue Covering w/Instruction Sheet

Other Customers Also Purchased

Top Flite - TOPTOPQ0507 - MonoKote Flat Insignia Blue 6