104240 RTR Savage Flux w/2.4

Overview

HPI - HPI104240 - 104240 RTR Savage Flux w/2.4

Features

HPI - HPI104240 - 104240 RTR Savage Flux w/2.4

• Chassis: Rigid 6061-series aluminum TVP (twin vertical plate) 0.098" 2.5mm) thick, extra low CG for high degree of control and
• cornering ability, included wheelie bar, twin battery boxes hold a
• variety of battery types
• Drive: Four wheel shaft
• Brushless Motor: HPI Flux Tork 2200Kv with machined cooling fins, 5mm shaft, handles up to 25V of power, held in place with two machined
• 8mm billet aluminum clamps and 0.12" (3mm) thick 7075 billet
• aluminum motor mount
• Radio: HPI TF-20U 2.4GHz with steering and throttle trim and reverse and dual rate adjustment, transmitter does not have charge jack
• Electronic Speed Control: HPI Flux Blur (HPIM0684) with reverse, programmable, integrated cooling fan and up to 6S LiPo battery
• handling capability
• Transmission: All metal gears running on rubber-sealed ball bearings
• Differential: Equipped with machined super heavy duty bevel gears, upgradeable with all nitro Savage option parts
• Spur Gear: Machined steel, 44 tooth
• Suspension: Uprights designed for the larger tires and weight of the Savage XL
• Wheels: HPI Warlock, chrome finish, width: 2.2" (56mm), 3.3" (83mm) diameter
• Tires: GT-2 on/off-road with blocky tread pattern and heavy-duty sidewall teeth, 6.3" (160mm) diameter, 3.4" (86mm) wide
• Shocks: Big Bore nylon bodied, oil filled
• Caster: Adjustable front and rear toe-in, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car
• Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
• Body: Trimmed and painted GT-2

Specifications

HPI - HPI104240 - 104240 RTR Savage Flux w/2.4

• Vehicle-
• Length: 21" (533mm)
• Width: 16.8" (427mm)
• Height: 10" (254mm)
• Front and Rear Track: 16" (406mm) outer edges of tires, side to side
• Front and Rear Tread: 13.1" (332.5mm) center of tires, side to side
• Wheelbase: 13.6" (345mm) Body-
• Length: 19.2" (487mm)
• Width: 8.5" (216mm)
• Height: 5" (127mm)
• COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set
• 2 10x16mm Differentials 1 HPIC2032
• 2 8x16mm Differentials 1 DTXC1585
• 4 8x16mm Front Uprights 2 DTXC1585
• 4 8x16mm Rear Uprights 2 DTXC1585
• 2 8x16mm Bevel Gear 1 DTXC1585
• 2 10x15mm Wheely Bar 1 DTXC1595
• 2 6x13mm Drive Shaft 1 DTXC1573
• 1 6x13mm Gear Shaft 1 DTXC1573
• 1 8x16mm Gear Shaft 1 DTXC1585
• 1 6x13mm Idler Gear 1 DTXC1573

Requires

HPI - HPI104240 - 104240 RTR Savage Flux w/2.4

• AA Batteries: Six for transmitter
• Batteries: Two NiMH (up to 8-cell flat or stick packs) with Deans connectors, or 2S or 3S LiPo hard case battery packs, 25C minimum
• both batteries must be the same type, voltage and capacity)
• Battery Charger: Depending on type of batteries selected
• Building and track equipment

Includes

HPI - HPI104240 - 104240 RTR Savage Flux w/2.4

• Assembled 1/8 scale HPI Savage Flux HP Monster Truck with Flux Tork 2200 brushless motor, Flux Blur ESC, HPI 2.4GHz radio system, SF-5
• high torque metal gear steering servo, painted & trimmed body,
• wheelie bar, instruction manual and HPI RC Cars DVD

Parts/Options

HPI - HPI104240 - 104240 RTR Savage Flux w/2.4